Disclaimer: CorbyLove will not be responsible nor liable for any damage
that might happen to your device during this process though the
possibility of any damage is negligible. Try this at your own risk. This
process has been tested and verified working on Samsung Corby 2.
CORBY 2 UI: Android Wannabe v1.4.8 by Michael
This installation guide is for SAMSUNG Corby 2 user only...
1. Install Samsung Kies and Multiloader
2. Open your multiloader
3. Click BRCM2133
4. Now choose the file you want to change like rc1, ffs, csc, etc then click browse button beside it and locate the modded file.
5. After that turn off your phone and put it in download mode*
6. Connect your Corby 2 to PC with USB cable.
7. Click port search until multiloader shows COM port Ready Frappe.
8. Now click Download button and wait until the process is complete.
9. Your phone will restart after the process is complete.
10. You can now unplug the USB from your PC. Enjoy!
*How to Activate download mode on Corby 2
press and hold Volume down button+Call button+On/Off button until your phone shows arrow on phone image.
 |
| download mode on samsung corby 2 |
NOTE:
If you want to change CSC file better remove the SIM card before proceeding. upgrading your firmware is also advisable.
To unlock, Press center part then swipe it downward or upward.
Download Corby 2 Touchscreen UI
for relashing to orginal ui screen
Password: FTLYZA
No comments:
Post a Comment